artikel opc

Got a problem oil content, turbidity, sand and BS & W as well in your field? If yes, this is really a complex issue that can degrade the quality and quantity of oil production. Let us first examine any losses for each of these issues.

1. The problem of Oil Content

Oil content is the amount of oil in the water that comes out of the water leg of the wash tank (separator) are headed to the pits, and then discharged into the environment. A high oil content, dangerous to the environment also reduces the amount of oil production. Concretely, the oil content of 300 ppm and 10,000 BOPD Test, then you will lose 90 barrels of oil a month. A year kehilangan1080 barrel. The number is not small, is not it?

2. Problem Turbididy

Turbidity is the cloudiness of water. Higher turbidity indicates the number of particles that are in the water, so the water becomes cloudy. Turbidity problem is also a pretty serious problem, especially if the water is used to feed Water Cleaning Plant (WCP). Water with high turbidity create a filter WCP work harder.

3. Problems Sand

Many find oil wells containing sand. Although already installed sand trap to catch him, still largely escaping towards shipping crude oilnya tank so the quality is very low (an increase of BS & W). Another bad result, the sand can clog the sampling point and interfere with the retention time of the separation process.

4. Problems BS & W

Basic Sediment and Water (BS & W) is a sediment and water content in crude oil measured in the shipping line. The smaller the BS & W, the better the quality of crude oilnya. In general, BS & W is considered good if the value is below 1%. Therefore, if the BS & W in the top 1% are considered problematic.

 

The fourth problem can be handled by one of our specially formulated coatings that. Yes, a bullet to 4 goals … really saving time, cost and effort, is not it? This formula can reduce the oil content, depositing sand more quickly so the water becomes much clearer.

Demulsifier usage in the field is still required. Our coatings in addition to helping alleviate the workload of demulsifier, also can work together so that the BS & W problems can be resolved with the use of a more efficient demulsifier. For information, before we discovered this formula, regardless of the dose used demulsifier can’t resolve the problem of BS & W for their sand.Our formula Efficacy in addressing the issue 4 has been tested in one of our partner field with very satisfactory results. You have the same problem? Please contact our engineer.

Our formula Efficacy in addressing the issue 4 has been tested in one of our partner field with very satisfactory results. You have the same problem? Please contact our engineer.

(MNC)